中文 (中国)
Tiếng Việt
UV Light Tester F150 – An Optimal UV Energy Measurement Solution for Manufacturing
In manufacturing industries that utilize UV curing technology—such as printing, electronics, UV adhesives, and surface coating—precise control of UV energy is a decisive factor in final product quality. The UV Light Tester F150 was developed to meet the demand for accurate, stable, and user-friendly measurement, helping manufacturers control UV curing processes in a scientific and efficient manner.
1. Overview of the UV Light Tester F150
The UV Light Tester F150 is a high-precision UV energy measurement device, specifically designed to measure accumulated UV energy during irradiation. It is an indispensable measuring tool in modern UV drying and UV curing systems.
Unlike instant UV intensity meters, the UV Light Tester F150 focuses on recording the total accumulated UV energy (mJ/cm²) that a material actually receives throughout the exposure period. This enables operators to accurately evaluate curing effectiveness, avoiding issues such as under-curing caused by insufficient energy or material damage due to excessive UV exposure.
With its compact design, simple operation, and high durability, the UV Meters F150 is suitable for both laboratory applications and continuous industrial production environments.
2. Working Principle of the UV Light Tester F150
The UV Tester F150 operates based on a UV-sensitive optical sensor capable of detecting and accumulating UV energy over time during irradiation.
The measurable wavelength range of the device spans from 250 to 410 nm, with 365 nm being the most sensitive band, making it highly suitable for commonly used UV curing systems. For different UV wavelength ranges, corresponding calibration is required prior to use to ensure measurement accuracy.
The measurement procedure is as follows:
-
Switch the power button to the “ON” position; the display will show “0 mJ/cm²”
-
Position the sensor surface on the back of the device directly facing the UV light source
-
As UV radiation is applied, the accumulated energy value increases continuously over time
-
At the end of exposure, read the result directly from the display
For subsequent measurements, the device must be powered off and then turned on again to reset the display to zero.
3. Technical Specifications of the UV Light Tester F150
| Specification | Description | |
|---|---|---|
| UV wavelength range | 250 – 410 nm | Suitable for UV LED and conventional UV lamps |
| UV intensity range | 0 – 5,000 mW/cm² | Accurate measurement of UV irradiation intensity |
| UV energy range (UV dose) | 0 – 999,999 mJ/cm² | Evaluation of total accumulated UV energy |
| Power supply | High-performance 3.6 V lithium battery | Compact design with low power consumption |
| Battery lifetime | Up to 10,000 hours | Under standard operating conditions |
| Device dimensions | Ø90 × 13 mm | Circular structure, easy to operate |
| Weight | Approx. 500 g | Convenient for handheld measurements |
| Operating temperature | 0 – 45 °C | Ensures stable performance during operation |
| Maximum tolerance temperature | 100 °C | Continuous exposure not exceeding 10 seconds |
| Calibration cycle | Recommended once per year | Ensures long-term measurement accuracy |
| Warranty period | 1 year from purchase date | Excludes damage caused by human factors |
4. Proper Usage Guidelines for the UV Light Tester F150
To ensure accurate measurement results and extend the service life of the device, users should follow these operating guidelines:
-
Switch the power to “ON” and confirm the display shows “0 mJ/cm²”
-
Place the sensor surface directly facing the UV light source without obstruction
-
Perform UV irradiation for the desired exposure duration
-
Read the accumulated UV energy value displayed on the screen
-
After measurement, switch the power to “OFF” to conserve battery life
Note: Each new measurement requires turning the device off and on again to reset the reading.
Conclusion
With its ability to accurately measure accumulated UV energy, user-friendly design, and high reliability, the UV Light Tester F150 is an essential device for modern UV drying and UV curing systems. Investing in the right UV measurement instrument not only helps manufacturers maintain consistent product quality but also optimizes operational costs and improves long-term production efficiency.
Consultation & Quotation
Are you looking for detailed advice on selecting the UV Light Tester F150 for your production line?
Contact person: Ms Yuna
Hotline: +84 965 535 345
Email: sales03@cousz.com
UV Light Tester F150
The UV Light Tester F150 provides accurate UV energy measurement, ensuring stable and efficient UV curing performance in industrial production.
Product SKU: COUSZF150E
Product Brand: COUSZ
Product Currency: VND
Product Price: 6868
Price Valid Until: 2025-12-29
Product In-Stock: InStock
Brian –
Very professional service.
admin –
Contact now for technical support!
Ms Yuna
📞 Hotline: +84 965 535 348
✉️ Email: sales03@cousz.com